© 2019 - estasir
Pyronix Belle Installation Manual
Posted on by admin
Software Installation Manual
Download driver flash disk toshiba. What our experts say WITH THE RANGE OF OPTIONS AVAILABLE and its ease of installation, this Pyronix sounder will no doubt rapidly gain the status of ‘belle’ in the eye of installers – even if it is a little rotund to conform to the dictionary definition! The Belle has a modern slimline enclosure and is designed to use the exposed parts of both lid and base as the strobe lens for maximum light output. Sound output from twin piezo sounders in SAB mode is high at 118 dBA at 1m. This is essential in a domestic bells-only situation where the neighbours’ ears are insulated by double glazed doors and windows. The internal components are all placed well away from the outer edges of the enclosure to improve resistance to vandalism. This can be further enhanced by the addition of a 1.5mm thick optional metal shroud which covers all the internal components, including the twin piezo sounders, strobe flash tube, battery and tamper switch.
Installation Guide
Dec 26, 2017 - 4 LCD RKD Installation Manual, 2. View Pyronix Limited Atlas 4 LCD/LED User Manual, 7. View Pyronix Limited Belle Sounder, 12.
The Belle can be set to SCB mode. The sounders and strobe are then powered from the 7.2 volt nicad back-up battery. Under these conditions, the sound output is reduced to 108 dBA at 1m and the flash rate from 120 to 30 per minute. This mode can be used to avoid overloading the control panel in multi-sounder installations.
Three-way tamper protection is provided by a front and rear operated switch and power cut-off relay contacts. The loss of 12 volts from the control panel operates the twin piezo sounders in the Belle, as does the opening of a tamper switch. Surprisingly, the opening of a tamper switch does not signal back to the control panel to operate the internal sounder until the back-up battery is also disconnected. Twin alternate flashing red LEDs, visible through the lid, indicate that there is power present – either from the back-up battery, control panel or both. A fixed 15-minute cut-off timer is included to conform to the latest EU requirements.
Coments are closed